STEELCO Washers

Washer Decontaminators

Washer Disinfectors

Tunnel Washer with Ultrasonic Cleaning

low  initial cost

lower  cost per cycle

higher  throughput capacity

reduced  labor & consumable expenses

rapid  heating to reach optimal final rinse & drying temperatures

efficient  ‘fill and discharge’ plumbing delivers rapid turnaround

STEELCO Washer DS500 Specifications .PDF file

STEELCO Washer DS500 Washer Decontaminator Dimensions

External Size Countertop Model:       35.43” W x 24.80” D x 33.07” H

External Size Under Counter Model:  35.43” W x 24.80” D x 33.07” H

Internal Rack Capacity:     20.47” W x 19.69” D x 20.87” H

STEELCO Washer DS500

Washer Decontaminator Cycle Temperatures

Cold  Water Pre Wash Cycle:      ambient to 95º F

Wash Enzymatic/Detergent Cycle:      131º F to 137º F

Elevated Thermal Rinse Cycle[s]: 194º F to 209º F

Hot Air Dry Cycle:158º F to 230º F

STEELCO Washer DS500 

Washer Decontaminator Cycle Times (plus Dry Time)

Reservoir Capacity 3.5 gallons

20 pre-set programs

capacity for 20 additional customized programs

Rapid Wash:   8 minutes (with TOSI Test results “excellent”)

Normal Wash:12 to 15 minutes (range due to Temperature specified)

Intensive Wash:      22 minutes (reserved for heavy dried-on encrustation)

STANDARD FEATURES for the STEELCO Washer DS500 Washer:

STEELCO Washer DS500 self cleaning chamber with rounded chamber corners

Temperature for washing and rinsing adjustable to 200 F

STEELCO Washer DS500 2 dosing pumps are standard additional are optional

LCD Display of processing time and remaining time

Complete Auto diagnosis for Trouble shooting system errors

RS 232 connection for PC intemperance

STEELCO Washer DS500 integrated air exhaust steam condenser

Pump to Drain facilitates rapid cycle times

STEELCO Washer DS500 is UL listed

Available in 1x220V/60Hz or 3x208V/60Hz

STEELCO Washer DS500 HEPA ambient air Filter

OPTIONS for the STEELCO Washer DS500 Washer:

STEELCO Washer DS500 Printer: cycle calculation and cycle tracking

Additional Dosing Pumps

STEELCO Washer DS500 Glass Window

Drain Water Cooling < 140º F (60º C)

Standard single level rack for upper level with one wash arm underneath................................................C51

Standard single level rack for lower level for STEELCO Washer DS500.................................................C52

Instrument Tray (full size) 19' x 9.85 x 2' (485x250x50 mm)........................................................................C62

2 level rack for 4 instrument trays for STEELCO Washer DS500.............................................................C98

3 level Micro Surgical Instrument and Cannulated Instrument Rack with 10 Luer-Lock connections

         and 10 hose connections on top level for cleaning lumens and working channels inside-and-out........C48

3 level rack with wash arm for 6 instrument trays for STEELCO Washer DS500....................................C88

4 level rack with 2 wash arms for 8 full size instrument trays for STEELCO Washer DS500.................C78

MIS instrument rack for one instrument tray with six MIS instrument for with 12 tubes and catheter

         and 10 Luer-Lock-connections for cleaning lumens and working channels inside-and-out....................C95

STEELCO Washer Racks

boost productivity and eliminate manual cleaning.

1, 2, 3, and 4 Level Racks for cleaning the widest range of trays and utensils.

Flexible and Rigid Endoscope Racks deliver disinfected rinses at safe temperatures.

C48 3 Level Rack cleans lumens & working channels inside and out.

STEELCO Washer DS600 Specifications .PDF file

Single or Double (pass-through) Door

STEELCO Washer DS600 Washer Standard Equipment

Steelco DS600 Single or Double Door

Description:

washing chamber entirely made of stainless steel AISI 316L

smooth chamber design to eliminate dead legs for potential bacteria grow

self cleaning chamber with rounded corners

three level water filtering system for excellent washing results

Manual operated bottom hinged door with safety glass window

Frontal basket loading

Automatic Rack coupling system for injector cleaning and drying to guarantee highest    

cleaning and drying results

Full drainage of re-circulating pump

Thermal decontamination possibilities up to 93ºC [200ºF]

PT1000 temperature probe

Trolley system with wheels and safety breaks for easy loading and unloading of racks

Equipped with 2 peristaltic dosing pumps for chemicals, microprocessor controlled;  

adjustable for each cycle independently

2 Level control for chemical jugs with minimum level alarm

Storage space for two 2.5 gal (10 liter) jug for chemical products

LCD display for cycle information and remaining processing time

Complete auto diagnosis for easy trouble shooting and maintenance

20 Pre-set programs

20 free additional programs for customer specific programs

Total control of cycle parameter, i.e. time, temperature, drying

RS232 interface for PC connection

Pass-word access for programming by facility staff

Electrical main power switch

Exhaust air connection diam. 50mm [2”] , with condensate drainage into the drain

Drying unit with 150m3/h [89cfm], equipped with double filter:

Pre-filter F-class

Heating power 3 kW

Integrated exhaust air steam condenser

Air drying for chamber and rack injectors

DS600-1 Single Door in 3x208V,60Hz and UL listed

DS600-2 Pass-through in 3x208V,60Hz and UL listed

STEELCO Washer DS600 Washer Decontaminator Dimensions (W x D x H)

External dimensions 600x660x1700mm [23.62”x26”x66.9”] (with door closed)

External dimensions 600x1270x1700mm [23.62”x50”x66.9”] (with open door)

Max rack dimensions 505x570x530mm [19.88”x22.44”x20.86”]

Loading height 850mm [33.46”]

Max. basket capacity 160 liter [42 gal]

Electrical connection 3x208V

Electrical tank heating 7.5 kW

Washing circuit with one pump for a total of 0.75 kW

Total power 8 kW

Water connection: cold, warm, DI

Options:

Re-circulating pump pressure monitoring

HEPA Filter H14

Electrical and/or steam heating

Integrated termal printer for cycle validation and cycle traceability

4.5 kW Boiler for pre-heating of pure water

3rd and 4th chemical dosing pump with low level switch

conductitivity probe for rinse water

480V/60Hz power connection

Conductivity Sensor

Dosing pump with Level sensor

Flowmeter for chemicals

Printer - Thermic, 40 columns, RS232 on front panel DS500

Drain water only cooling < 140º F (60º C)

Drain pump

Illumination for wash chamber

Hepa air filter

Steam feed (steam only)

Options for STEELCO Washer DS600 Trolley & Racks:

Manual transfer trolley 850mm.................................................................................................................................C250

One level rack for STEELCO Washer DS600.......................................................................................................C500

Four level rack for STEELCO Washer DS600 with wash arms...........................................................................C501

Three level rack for STEELCO Washer DS600 complete wash arms................................................................C502

Anaesthesia rack for STEELCO Washer DS600 4 sets......................................................................................C503

Two level rack for STEELCO Washer DS600 with 18 MIS & 18 Ophthalmologie connections.......................C504

3 level Micro Surgical Instrument and Cannulated Instrument Rack with 10 Luer-Lock connections

         and 10 hose connections on top level for cleaning lumens and working channels inside-and-out........C537

Rack for 2 container with cover (150x300x600 mm) for STEELCO Washer DS600........................................C506

Rigid Endoscope rack with drying, Luer-Lock and pipe connections for STEELCO Washer DS600............C508

Two level rack with 42 injectors for laboratory glassware for STEELCO Washer DS600................................C512

Net tray  1/1 for STEELCO Washer DS600...........................................................................................................C62

Additonal Luer-Lock connection for STEELCO Washer DS600

Glassware Washer Rack "flexirack" 32 vertical injection nozzles 10 pipette

Cost of Cleaning Benefit Analysis

Manual Cleaning Reprocessing versus automated Surgical Instrument Washers

STEELCO Washer Decontaminators,

Tunnel Washers, and/or Washer Disinfectors

Click Here to download the Cost Analysis.

Cost Analysis compares the cost of manually cleaning reprocessing surgical instruments and/or scopes versus automated cleaning reprocessing using washer decontaminators, tunnel washers, and /or washer disinfectors. The Cost Benefit Analysis offers national average benchmark cost values that can be replaced actual cost values to produce a personalized cost benefit analysis. This “Washer decontaminator Cost Benefit Analysis” can also be used to forecast future changes in reprocessing costs and/or compare other alternative methods for cleaning surgical instruments and/or scopes.

Automated STEELCO Washers

STEELCO Washer Decontaminators,

Tunnel Washers, and STEELCO Disinfectors cut costs.

Ports for cleaning cannulated Surgical Instruments inside and out.

STEELCO Washer Racks are designed for cleaning cannulated surgical instruments with working channles and ultra fine lumens inside-and-out. Delicate Eye Surgical Instruments are held securely in place while the washer cleans and flushes working channels.

Compact STEELCO Washer DS500.........Washer Rack C88

Full size STEELCO Washer DS600...........Washer Rack C504